CarTFT.com
![Mitac PD10BI (Intel DN2800MT2) Rev.2 Half-Height (Intel Bay Trail Celeron J1900 4x2.42Ghz CPU, 10-19VDC) [<b>FANLESS</b>]](http://ipc-solution.com/image_db/Mitac_PD10BI_MT.jpg)
- Assemblation of system (Hardware + Software) -
Mitac PD10BI (Intel DN2800MT2) Rev.2 Half-Height (Intel Bay Trail Celeron J1900 4x2.42Ghz CPU, 10-19VDC) [FANLESS]
PRODUCT IS CURRENTLY NOT AVAILABLE !
This board is produced by MITAC, the OEM producer of Intel DN2800MT. This board is based on Intel DN2800MT, but is equipped with the moderm Intel BayTrail plattform.
- Successor model of Intel D945GSEJT and DN2800MT mainboard
- Quad-core Intel Celeron J1900
- Slim form factor; <20mm z-height
- Meets channel All-In-One specification
- ExpressCard/34 adapter option (mobile ecosystem compatibility) via PCIe mini Card
- Supports new Mobile SATA (SSD) card via full-length PCIe Mini Card
- Supports Z-U130 flash drive
- Wide-range (10-19V) input voltage tolerance
- TPM stuffing option
| CPU | Intel Celeron J1900 |
| Graphics | Intel GMA HD |
| Formfactor | ITX (17x17cm) |
| RAM | 2x SO-DDR-III |
| Audio | 2+2 Channel HD Audio |
| Base | Intel ITX |
| USB | 8x USB 2.0 |
| Firewire | -- |
| IDE/SATA | 2x SATA |
| LAN | 1x 10/100/1000 Mbit |
| Parallel | 1x |
| Serial | 2x |
| yes | TV-Out |
| no | PCI |
| yes | Mini-PCI |
| no | IDE |
| no | DVI |
| yes | 800x480 Resolution |
| yes | Passive-Cooling |
| yes | PCI-Express |
| no | PCMCIA |
| yes | SATA |
| no | CPU changeable |
| no | Compact Flash |
Please login for creating product ratings.
from tohempel am 11.03.2015
| 
| See all my comments
from grigoridav am 15.07.2014
|
| See all my comments
from PaulaMüller am 27.04.2011
|
| See all my comments
from bonanno.m am 24.02.2011
|
| See all my comments
BACK
1
2
3
Forward
Your rating: 
Please tell us your opinion. Rate the product on a scale from 1 to 5. A value of 5 means the best possible rating.
If you want you also can leave a comment.
Your ratings are honored on many ways. Your report will help other customers to better judge about the products. And
you can benefit from reports other customers are giving.
In addition we credit 0.50 EUR for each given rating with comment and 1.00 EUR for each given rating with comment (more than 150 characters)
on your account. The credit will be substracted automatically on your next order !
We reserve us the right to delete given comments (for example on attempts to give comments with senseless content, copying of other comments, inserting of foreign content, abusing the system for financing orders).
"Fair-use-policy" does apply (as of rule of thumb you should give comments for products which you have purchased already. And your credit account only in rare cases will have 2 or even 3 digits). The credit can only be withdrawn by placing an order. It is not possible to get the credit cash or transferred in an other way.
|
Customer ratings:
Average rating, based on 13 ratings |
from tohempel am 11.03.2015
|
| See all my comments
Ist ein echter Rechenknecht und kann bis nahezu zur Voll-Last lüfterlos betrieben werden (aber dann steigt die Kerntermperatur auch auf gut 90 Grad; wer die Leistung also auf Dauer braucht, sollte mind. einen Lüfter vorsehen). Widererwartend hatte mein MythTV-Frontend bei der Wiedergabe von HD-Content seine Problemchen (ruckelnde Bilder, lange "Denkzeiten") aber die CPU-Last lag gerade mal bei mässigen 50%. Vermutlich liegt es an der GraKa (HDMI-Ausgang) oder am Treiber (Ubuntu 14.4).
from grigoridav am 15.07.2014
|
| See all my comments
Hello,
1. It is not 4x2.42GHz as written in header. It sound to be 4x1.99GHz (centos: /proc/cpuinfo)
2. If you wish to use this motherboard with M350 case, take care ! The M350 front POWER SW and POWER LED cables are too short to reach the connectors on motherboard. It sounds the adapter kit should be used.
3. The low voltage RAM should be used (?)
4. Failed graphical mode during CentOS 6.5 x86_64 minimal install => cann't do custom partitioning during install
5. Mitac documentation is not explicit
from PaulaMüller am 27.04.2011
|
| See all my comments
Tolles Brett, alles drauf was ich so brauche, SATA-KAbel ohne Halteclip (nix fürs Auto!) zudem waren angespritzte Stecker verformt (unbrauchbar!) besser gleich gute SATA-Kabel aus dem Zubehör erwerben
from bonanno.m am 24.02.2011
|
| See all my comments
A dir poco eccezionale!! non gli manca nulla!! dovrebbe solo fare il caffè!!
Compatible enclosures
CFI A-7879 V2 Mini-ITX enclosure (4x 3.5" NAS, 1x 2.5", Hot-Plug, 1x PCI, 250W)
M200-LCD Enclosure
M350 Mini-ITX enclosure
MHero-L-B Mini-ITX enclosure (1x PCI, Slimline ODD, 84W PSU)
MHero-L-R Mini-ITX enclosure (1x PCI, Slimline ODD, 84W PSU)
MHero-S-R Mini-ITX enclosure (with 84W PSU)
Perfect as music server with MSATA SSD :O)